If you need to change the layout of your home then making a structural alteration to open up a wall is great way to go. The wall you want to open up though will need to be assessed to check if it supporting any other may be a brick load or even the floor timbers so it will be necessary to do a few checks first. A typical design of a structure could have twin reception rooms Wholesale Frank Clark Jersey , (rear and front), with the rear room joists usually running from the spine wall (the wall you may be opening) to the external walls. The front room joists in turn Cheap Armani Watts Jersey , may run from the same spine wall to the front external wall of the dwelling.
Any wall that is bearing the weight of joists is therefore load bearing and will have to be supported prior to any major alterations undertaken. Typically this would be done with the use of acrow props and timbers 'needles' or steel supports called strong boys to take the load whilst alterations are underway.
Some loads may not be from masonry by the way, they could be from timber partitions above the wall you want to take out. In the same fashion the load must be supported both before and after any alteration is taken out.
So OK Cheap Dorian O'Daniel Jersey , you've made the opening and the structure has been temporarily supported. This is great at the moment but nobody wants to leave ugly looking steel props in the middle of the room forever so it will be necessary to provide a more permanent support method. This structure will need to be supported by using a lintel which may be of either concrete or steel construction depending on the engineers specifications for the job. A structural engineer will be able to help you choose the right support for the job. Never guess and think you know if you are not entirely sure! Structural engineers are paid to calculate loads and will save you a hell of a lot of money if you get it wrong and calculate incorrectly.
You will need to inform the local building inspector that you are intending to carry out work to the property who will be happy to advise on ensuring the alteration is to current standards. Building regulations is required for most structural alterations so you must make enquiries before commencing works.
Before taking any masonry away, mark out the opening in the wall that is required. Use a hammer and bolster to remove any plaster on the wall. This way you will know exactly what you are taking away and also ensuring there are no hidden pipe or cables that may cause an obstruction. You will want the new RSJ or concrete or steel lintel to rest on a minimum of 150mm bearings so make provisions for this when marking out. After the structure is propped and secure you can start the opening by using an angle grinder at the openings boundary or by using hammer and bolster.
Any debris in your workspace should be cleaned and removed to ensure you are unobstructed in any way. You will now want to prepare for fitting the new concrete or steel lintel so ensure you have enough helpers to lift the lintel in place and that you can do this safely. Some scaffold boards spanning trestles offer a safe way to do this. Bed the lintel onto a stiff 3:1 mix of sand and cement sitting on concrete pad stones. Pack up the lintel with slate afterwards to ensure it is tight to the masonry above.
Leave your support props in until the next day to let the mortar set. Only after this can the props be taken away and in doing so Cheap Derrick Nnadi Jersey , fill in any holes you made for the props with bricks and point up and slate if required. All you need to do now is make good the plaster work afterwards. Make sure the local authority building inspector has seen all works etc, before re-plastering. How do you increase your visibility by focussing on 'high pay off' activities to build your profile and profits?
Speaking in public is the fastest way to attract Cheap Breeland Speaks Jersey , win and even retain more profitable clients.
It is a 'one to many' activity that delivers an enormous return on investment for your time and effort.
It also builds your expert power and recognised authority status.
When combined with a good media relations plan it is one of the most powerful and cost effective marketing strategies around.
Here's a personal case study of how to turn a five minute speech into $200,000 worth of media coverage.
"Malaysia - Opening doors to Australian Business" was the theme for a business breakfast held on March 10th 2006. Malaysia is Australia's ninth largest trading partner Cheap Tanoh Kpassagnon Jersey , with two-way trade between our two countries currently standing at almost $10 billion.
As a Perth-based international business speaker working in Malaysia, I joined James Wise Cheap Chris Conley Jersey , Australian High Commissioner to Malaysia (left hand side) and Peter Kane, Australian Senior Trade Commissioner to Malaysia and Brunei (right hand side) on the platform at a breakfast function "Meet The Ambassadors" to share firsthand insights on how to tap into the second strongest economy in South East Asia.
The marketing copy for the event was impressive.
"James Wise is a senior career officer with the Department of Foreign Affairs and Trade and has been Australia's High Commissioner to Malaysia since 2003.
Peter Kane has served as Austrade's Senior Trade Commissioner in Kuala Lumpur since 2005.
Peter has a wealth of experience gained from assisting Australian exporters in diverse markets across the world for nearly 20 years."
More than 250 people turned up to the breakfast. Including a columnist for Malaysia's most influential media vehicle Cheap Mitch Morse Jersey , the The Star newspaper.
So why did the columnist choose to write a full page article about my five minute speech and not the two other more eminently qualified and experienced speakers?
Well, I believe there were five essential ingredients that made it irresistible to the media and journalist.
Here are the insider's secrets so you can achieve the same amazing success with your next speech.